What are the original wheels of Malibu xl called?
- How often should Chevrolet Malibu XL tires be replaced? What is the brand, model and size of Malibu XL tires?
- The weight of the Malibu xl17 wheel hub
- Mairubu xl wheel size
- Mairubu xl wheel hub data
The tire replacement cycle for Chevrolet Malibu XL is 60,000-120,000 kilometers. If it has been used for more than 6 years, it must be inspected even if there is no obvious damage on the surface.
The original tire brands used by Chevrolet Malibu XL are Continental and Goodyear. The tire sizes are divided into 205/65R16, 225/55R17 and 245/45R18 models according to different configurations.
The meaning of Chevrolet Malibu XL tire parameters
Example: 225/55R1895Y
Chevrolet Malibu XL tire parameters Ruibao XL tire replacement tutorial
1. Make sure the car is parked on a level and solid road surface. If something goes wrong while driving on the road, a safety warning sign must be placed 150 meters behind. Use a tool to remove the tire nuts. The nuts must be removed in diagonal order, otherwise the wheel hub may be damaged.
2. Place the jack directly below the support point, and then slowly raise the vehicle. When the vehicle is completely raised, the tires can be removed. Because of the tight combination, sometimes it is difficult to remove the tire. You can use your foot strength to kick it appropriately.
3. Put the new tire back, fix the nuts manually and put the vehicle down. Tighten the nuts with special tools, and pay attention to tightening them diagonally. Only when the vehicle puts down the tires and touches the ground can the nuts be tightened.
Determine whether to replace the tire according to the degree of tire wear
1. If the wheel ages, it will mainly occur in the tire edges and tread patterns.
2. The tread pattern has reached the limit indicator mark, or even lower than the mark.
3. When there is a bulge in a part of the tire, there is a risk of explosion if you continue to drive.
4. Based on the depth and area of tire damage, determine whether the tire needs to be repaired or replaced directly.
5. If the sidewall is damaged, it can usually only be replaced directly.
6. When the number of repairs is too many, it is not advisable to continue repairing, let alone go on the road.
Mairubu XL uses aluminum alloy wheels. This part is located in the center of the wheel and is usually called a "rim" or "steel rim". Maintenance of wheel hubs is crucial because they are susceptible to corrosion and deformation, which may cause safety hazards. Next, compare the characteristics of steel wheels and aluminum alloy wheels:
Steel wheels have the advantages of low cost and resistance to metal fatigue in manufacturing, and are usually produced through a casting process. , such as casting aluminum alloy wheels using low-pre ssure casting technology. However, their disadvantage is that they are heavy. Compared with aluminum alloy, steel wheels are heavier, which increases inertial resistance, have poor heat dissipation performance and are prone to rust.
In comparison, aluminum alloy wheels are much lighter and have less inertial resistance. Its high-pre cision manufacturing results in small deformation during high-speed operation, which helps improve the car's straight-line driving performance and reduces tire rolling resistance, thereby reducing fuel consumption. In addition, the thermal conductivity of aluminum alloy is three times that of steel, which means that it has excellent heat dissipation properties and has a positive impact on the thermal stability of the vehicle's braking system, tires and braking system.
In general, considering the advantages of aluminum alloy wheels in terms of weight, inertial resistance and heat dissipation performance, it is more convenient for Malibu XL to choose aluminum alloy wheels as its configuration. wise.
Mairubu XL wheel hub details: It uses an AluminumWheel hub, and its main material is steel. The Chaipata wheel hub is the core part of the wheel, which is what we often call "rim" or "steel rim". Its maintenance is crucial, otherwise it may cause safety hazards due to corrosion and deformation.
Characteristics of steel wheels: Its manufacturing process is relatively simple, usually using casting technology (for example, aluminum alloy wheels usually use low-pre ssure casting), and the cost is low. At the same time, steel wheels have high resistance to metal fatigue, which is a significant advantage.
However, the disadvantages of steel wheel hubs are: they are heavier, and there is a significant weight gap compared with aluminum alloys, which increases inertial resistance, has poor heat dissipation performance, and is prone to rust.
In contrast, the advantages of alloy wheel hubs: its significant lightweight characteristics, reduced inertial resistance, higher manufacturing pre cision, especially when rotating at high speed, small deformation, which is conducive to improvement The car's straight-line driving performance reduces tire rolling resistance, thereby reducing fuel consumption.
However, the disadvantages of alloy wheels are: the thermal conductivity is about three times that of steel. Although the heat dissipation is excellent, it may have an impact on the vehicle's braking system and the thermal attenuation of the tires.
In general, the wheels of Malibu XL are made of aluminum alloy, while the steel parts are made through forging process. The cleaning and maintenance of wheel hubs are crucial because it directly affects the safety of the vehicle. Steel wheels and alloy wheels each have their own applicable scenarios, and users should choose based on actual needs and vehicle performance. It is worth noting that the weight and inertial resistance of the wheel hub will affect vehicle performance, and alloy wheel hubs have advantages in heat dissipation and have a positive effect on vehicle braking and tire maintenance.